|
|
|
|
|
|
Hydrocarbon Traps
|
MSRP: $184.27
Our Price: $164.46
You Save $19.81!
|
|
|
The 580-1900 Series hydrocarbon traps are designed to remove organic compounds from carrier gases, air and hydrogen. These high capacity traps contain 200cc of carbon impregnated filter media. Excellent efficiencies are achieved for the removal of the following; Acetone, any Acetate dissolved in oil, Isopropyl Alcohol, Mercaptans and organic acids, as some examples.
|
|
|
|
|
|
|
|
|
|
Oxygen Traps
|
MSRP: $197.75
Our Price: $176.50
You Save $21.25!
|
|
|
The Oxygen Traps contain highly active, metal containing inert reagents capable of reducing the oxygen content in a gas stream to less than 15 ppb. These traps have the added advantage of being able to remove up to 2 grams of moisture with no effect on oxygen capacity. Typical applications involve but are not limited to; Nitrogen, Helium, Argon, Carbon Dioxide and low boiling point aromatics such as Benzene, Toluene and Alkyl Benzene's for Oxygen cleaner gases.
|
|
|
|
|
|
|
|
|
|
Indicating Oxygen Traps
|
MSRP: $191.01
Our Price: $170.48
You Save $20.53!
|
|
|
The Indicating Oxygen Traps contain highly active, metal containing inert reagents capable of reducing the oxygen content in a a gas stream to less than 2 ppb. As the metal is oxidized, it changes color indicating the presence of oxygen. Typical applications involve but are not exclusive to; Nitrogen, Helium, Argon, Carbon Dioxide, and low boiling point aromatics such as Benzene, Toluene and Alkyl Benzene's for Oxygen cleaner gases.
|
|
|
|
|
|
|
|
|
|
Moisture Traps
|
MSRP: $184.27
Our Price: $164.46
You Save $19.81!
|
|
|
Removal Capacity (H2O) - 36.0 grams (H2O < 18 ppb)
The Moisture Traps are designed for use in high purity gas systems to prevent the possible introduction of moisture into the instrumentation carrier gases. The trap has a maximum flow rate of 70 lpm air at 100 PSIG.
|
|
|
|
|
|
|
|
|
|
|
Moisture Traps
|
MSRP: $210.11
Our Price: $187.52
You Save $22.59!
|
|
|
Removal Capacity (H2O) - 72.0 grams (H2O < 14 ppb)
The Moisture Traps are designed for use in high purity gas systems to prevent the possible introduction of moisture into the instrumentation carrier gases. The trap has a maximum flow rate of 70 lpm air at 100 PSIG.
|
|
|
|
